Application：
BCDMH can be used in swimming pools , industrial cooling water system and other fields.

Superiority:
Now in the Chinese market, the production of bromochloro-disinfectants are prepared either by simply mixing two or more individual bromo- and chloro- preparations physically, or by reducing complex bromochioro- preparations by inorganic process. The products obtained from either of them lead to lowering the disinfection capacity and effect of their active matter. In contrast, our product is synthesized by a special technical process, by attaching bromine and chlorine on an organic substrate directly. It has better activity, higher stability, lower cost and more safe. 

Package and storage:
Power: Weight 25 Kg packed in a braided bag lining with heave duty polyvinyl chloride.
Tablet: Weight 40kgs or 20kgs packed in plastic barrel with PE inner gag, or meet your special needs.
Storage: store in a dry, cool, well-ventilated area away from heat ,open flames, organic chemicals and light. 
　

Superiority:
Because of the fact that the granularity of rich-bromine is extremely fine. It is so difficult to purify and filtrated, the production is limited in small scale. Now the problem has been completely solved by utilizing a special technology in our company. The achievement has been approved by the technical committee authorized by Hebei Province and affirmed being in the first time appeared in the world. Now, the national patent right has been claimed. 

Application:
BCCA can be used in swimming pools , industrial cooling water system and other fields.

Package and storage:
Power: Weight 25Kgs packed in a braided bag lining with heave duty polyvinyl chloride.
Tablet: Weight 25kgs packed in plastic barrel with PE inner gag, or meet your special needs.
Storage: store in a dry, cool, well-ventilated area away from heat ,open flames, organic chemicals and light. 
　

Application:
DBDMH can be used in swimming pools , industrial cooling water system and other fields.

Package and storage:
Power: Weight 40 Kg packed in a braided bag lining with heave duty polyvinyl chloride.
Tablet: Weight 25kgs packed in plastic barrel with PE inner gag, or meet your special needs.
Storage: store in a dry, cool, well-ventilated area away from heat ,open flames, organic chemicals and light. 
　

Superiority:
Because the oxidizing power of chlorine dioxide is very strong, it is usually prepared in a water solution with 2% ClO2 or the oxide and its activator are packaged separately to form a dualized packing. But it is very inconvenient in transportation and using and has to be pre-activated before operation.
A unified chlorine dioxide package has been prepared by our company through especial technique to achieve the unifying of oxide and its activator. The product is very safe and stable in transportation and storage and can be used directly without any pretreatment.

Application:
Swimming pool 、 industrial cooling water as well as waste water treatment.

Package and Storage:
To meet your special request , we can design and supply the form according to you. 

Caution :
Water solution should be prepared in site. Once opened a package, it must be wholly used, unallowable to be left anymore. It is not allowable for mixing with other preparations or packing separately by yourself.
　

Superiority:
Similar to that of BCDMH, it is an effective disinfectant. However, it owns some particularly advantages .First of all, its solubility in water is higher than that of BCDMH, so in the case of requiring faster effect on disinfection, it appears high superiority. Secondly, the released copper ion has also the function to activate BCDMH with a result to increase its efficiency. Thirdly, Since copper ion displays brilliant light blue in water, so in swimming pool, it acts as a disinfectant and regulates the water colour at the same time. Finally, the dosage for disinfection is small and will not attack metallic vessels.

Application:
The product can be used especially in swimming pools.

　

Aluminum Sulfate Tablet

Specifications for Aluminum Sulfate Tablet

Chemical name	Aluminum Sulfate
Molecular weight	666.41
Molecular formula	Al2(SO4)3·18H2O
CAS No.	17927-65-0
Appearance	White or off white
Odor	No odor
Content	92%- 99%
Al2O3	≥15%
pH	≥3（10g/L Aqueous Solution）
Moisture	0.1-0. 5%
Form	20g tablet，granular
Packing	1kg bottle，5kg bucket，10kg bucket，50kg plastic drum，50kg fibre drum
Usage	Water treatment. Use as flocculant.
Storage	Store the product under a cool, dry and ventilated place. Store away from alkali, food.

1) Super Cl
Chlorine granular，used to do super chlorination
DIRECTIONS FOR USE
1、Add 2kg Chlorine granular per 1000 tons of pool water every day or as often as needed to maintain chlorine residual at 0.3-0.5 ppm.
2、If use chlorine granules to shock dose pool. Add at a rate of 20kg per 1000 tons of pool water. Allow chlorine level to drop to below 3ppm before swimming.
3、Sprinkle the product equally around the inside edges of the pool.

2) Chlorine tablet
Chlorine tablet，used as sanitizer
DIRECTIONS FOR USE
Always put the product in feeder or suspension at the entrance of the pool water. Add 200g to 400g per 100tons every day based on the swimmer in pools.
If it is first time to use this product you should add other products such as chlorine granular to improve the content of free chlorine.

3) Hypochlorite liquid
Hypochlorite，used to increase available chlorine
DIRECTIONS FOR USE:
Sprinkle the product equally inside around the pool.
Ensure all pool equipment is working properly.
Completely dilute the product 100 times with water first. Add 1.5kg of product per 1000 tons water.

4) Super Br
Used to treat as a bromine pool
DIRECTIONS FOR USE:
Used with other biocides in feeder or Sprinkle the product equally around the inside edges of the pool.
Initial Treatment: Add 10kg of this product per 1000 tons of pool water every month to establish a 0.5ppm bromine reserve.
Maintenance Treatment: Add 200g of the product per 1000 tons of pool water with other biocide to maintain chlorine residual at 0.3-0.5ppm.

5) Bromine tablet
Bromine tablet，used as sanitizer
DIRECTIONS FOR USE
Always put the product in feeder or suspension at the entrance of the pool water. Add 200g to 400g per 100tons every day based on the swimmer in pools.
If it is first time to use this product you should add other products such as chlorine granular to improve the content of free chlorine.

1) Cu
Used to kill algae
DIRECTIONS FOR USE
Always dilute product 50 times before addition to pool water. dispense the diluted solution equally around the inside edges of the pool. Always apply chemicals separately. Never combine them
Pools outdoors with sunshine
Add 100g of this product per 100 tons of water every 2 weeks.
Pools indoors with sunshine
Add 60g of this product per 100 tons of water every 2weeks.
Pools indoors with lamplight
Add 60g of this product per 100 tons of water every 3 weeks
The next day brush dead algae off pool surfaces so it can be filtered away. If algae still persist, repeat treatment after 2-4 days. Use of a stain and scale control and filter aid is recommended 2 days after final treatment to remove residual copper from pool water.

2) CuClBr
Used to kill algae and disinfect
DIRECTIONS FOR USE:
Used with other biocides in feeder or Sprinkle the product equally around the inside edges of the pool.
Pools outdoors with sunshine
Add 80g of this product per 100 tons of water every 2 weeks.
Pools indoors with sunshine
Add 45g of this product per 100 tons of water every 2weeks.
Pools indoors with lamplight
Add 45g of this product per 100 tons of water every 3 weeks

1) ClO₂
Chlorine dioxide，destroy bacteria, algae and other contaminants
DIRECTIONS FOR USE
Apply the product with the dosage of 1000g per tons everyday.
Ensure the pool circulation system is working properly first.
Maintain chlorine residual at 0.3-0.5 ppm of ClO2 by the analytical method DPD after the addition.
Sprinkle the product equally around the inside edges of the pool or apply it above pool inlet.
When used to purify the air, apply 1 tablet(20g) in water per 10m2 everyday in the corner of bathroom or washroom.

2) O₃
Used to shock dose pool
DIRECTIONS FOR USE:
If use the product to shock dose pool, add at a rate of 30kg per 1000 tons of pool water every 40 to 60 days.
Maintenance Treatment: Sprinkle the product equally around the inside edges of the pool, add at a rate of 1.5kg per 1000 tons of pool water every 2 weeks. Allow water to recirculate 30 to 40 minutes before swimming.

1) pH+
pH plus，used to increase the pH volume of pool water
DIRECTIONS FOR USE:
The ideal pH range for your pool is 7.2 to 7.8.
If pH level is lower than 7.2, distribute 1/4kg per 50 tons of water directly into the deep end of the pool. Allow water to recirculate four hours, recheck pH, and repeat treatment if necessary.

2) pH-
pH minus，used to decrease the pH volume of pool water
DIRECTIONS FOR USE:
Test water with a test kit to determine the pH. If the pH is above 7.6 add 5 kg. of PH- per 100 tons of water. Simply sprinkle onto the surface of the water. Keep the filter running to ensure dispersion throughout the pool and then test again 2 hours later. If the pH reading is still above 7.6 repeat the dosage until the pH reaches the range of 7.2 to 7.6.